BLOG

Bolt machine use matters needing attention

Precautions for use 1. Before drilling, it is necessary to ensure the stability of roof and coal gang and carry out safe operation. 2. Stop the bolt machine from being placed on the ground. As the drilling rig is flat on the ground, once the ventilation is misoperated, the air leg suddenly sticks out, which will cause accidents. 3, bolt machine drilling, stop wearing gloves to hold the drill pipe. 4. When the eye is opened, the drilling rig shall be stabilized to open the eye. 5, pneumatic bolting machine drilling, should be uniform speed plus atmospheric leg thrust, to prevent the formation of uneven thrust due to slow drilling speed, sticking, broken drill, chipping blade and other incidents. 6. Anchor Rig Return

2016

01-12

Current Situation and Development Trend of Bolt Drilling Machine at Home and Abroad

Bolt support is a kind of roadway support method developed rapidly in recent years. By anchoring the anchor in the rock, the mechanical state of the surrounding rock itself is improved, and the supporting body and the surrounding rock itself form a unified structure that can bear the load, so as to improve the strength of the rock itself, prevent or delay the deformation of the surrounding rock, and effectively maintain the integrity of the surrounding rock and the shape of the roadway section. Anchor drilling rig is the key construction equipment in the construction of bolt support. The construction speed of bolt support and the quality of support depend largely on the anchor drill. Bolt support drilling rig technology is one of the key technologies that affect the speed, quality and efficiency of bolt support construction.

2016

01-12

Brief Introduction of Anchor Rig

Bolt drilling rig is an indispensable tool in coal mine bolt support, and the development of bolt support requires a large number of bolt hole drilling equipment to ensure. Anchor drilling rig is also called anchor drilling rig in some places, which is a drilling tool in coal mine roadway bolt support work. It has outstanding advantages in improving the support effect, reducing the support cost, speeding up the speed of roadway, reducing the auxiliary transportation volume, reducing the labor intensity, and improving the utilization rate of roadway section. Anchor drilling rig is the key equipment of bolt support, which affects the quality of bolt support-the location, depth, accuracy of the hole and the installation quality of the bolt, and involves

2016

01-12

Pneumatic Anchor Rig Use and Maintenance

With the development of bolt support technology, as the main mechanical equipment in the production process of bolt support, the bolt drilling rig has developed from the original single function, poor reliability, low technical content and poor safety to today's new drilling rig with high reliability, good safety and high degree of automation. At present, the use status of some mine bolting rigs is not very good. It is often that a new drilling rig needs to be repaired on the ground in less than two months, which seriously affects normal production. Whether the anchor drill can work normally and whether it can be eliminated accurately and timely after the failure is to improve the support effect, speed up the speed of roadway, reduce labor intensity, improve production efficiency and improve

2016

01-12

Hydraulic Bolt Drill

Hydraulic anchor drilling machine has the advantages of safe explosion-proof, reasonable structure, convenient operation, high power, high efficiency, long service life, labor saving, etc., with extremely low failure rate, light weight and convenient operation. It can realize high-speed and high-quality drilling work in roadways with various rock hardness of f≤ 10. It can save energy and increase efficiency when used in roadways with compressed air. It is a necessary equipment for users in roadways without laying pressurized air pipelines, it can be used with fully mechanized excavating machine in fully mechanized roadway.

2016

01-12

Installation and operation of hydraulic bolter

The complete work of the hydraulic bolter has a lot to do with the correctness of its installation, so the installation before use must be especially careful and careful. When the location of the pump station and the host is determined. Connect the two oil inlet and return pipes between the oil pump outlet valve seat of the pump station and the oil inlet and return ports of the main engine. After confirming that the pipeline connection is correct, add about 120 liters of N46 anti-wear hydraulic oil into the oil tank, which can also be replaced by 30# mechanical oil. It is better to keep the liquid level at the middle and upper part of the oil mark. Hydraulic oil can also be added into the oil tank in advance according to the user's conditions. However, when using the hydraulic bolter, there are many small details that need to be closed.

2016

01-12

< 123 >

CONTACT INFORMATION

No.988 -22, Gangcheng Avenue, Jiangyin City, Jiangsu Province

+86-510-86688262, 13771271888 (Mr. Zhou)

13771271888@139.com

jinniu Links: Changzhou Aviation Gear Co., Ltd.

OFFICIAL ACCOUNTS

Welcome to the mobile website to learn more

Picture Name

ONLINE MESSAGE

If you have any suggestions, please leave us a message or send us an email, we will reply you within 1 working day after receiving the email.

Submit Message

Jiangyin Jinniu Technology Co., Ltd.

Powered By www.300.cn    SEO