Welcome to the official website of Jiangyin Jinniu Technology Co., Ltd.!
Hotline: +86-510-86688262
Home
About Us
Products
Blog
Equipment
Service
Contact Us
中文版
Pneumatic Anchor Rod Driller Series
Pneumatic Outrigger Driller Series
Pneumatic Handheld Driller Series
Mineral Anchor Rope Tensioning Machine Tool Series
Anchor Rod Tension Meter Series
Drill Tool Series
MQ22-400/60 Mineral Pneumatic Anchor Rope Tensioning Machine Tool
YCD22-400/60 Tensioning Jack
YCD22-300/63 Tensioning Jack
YCD18-200/63 Tensioning Jack
The MQT-125/3.5 (high power) type pneumatic anchor drilling rig is widely used in roadways with rock hardness ≤f10, especially for the bolt support work of coal roadway. It can drill the roof bolt hole and drill the anchor hole. The resin coil type anchor rod and anchor cable can be stirred and installed, and the bolt nut can be installed and tightened once without any other equipment, and the pre-tightening force requirement of the initial anchor can be achieved.
MQT-125/3.5 Mineral Pneumatic Anchor Rod Driller
MQT-120/2.7 type pneumatic anchor drilling rig is widely used in roadway with rock hardness ≤f8, especially for bolt support work of coal roadway, drilling hole for anchor plate, drilling cable hole, stirring and The resin coil type anchor rod and anchor cable are installed, and the bolt nut can be tightened once in one time without other equipment, and the pre-tightening force requirement of the initial anchor is achieved.
MQT-120/2.7 Mineral Pneumatic Anchor Rod Driller